Fixes for Individual (including simplified model, instructions, etc.)

Wardrobe/GUI/Individual.vb

@@ -56,6 +56,9 @@ Public Class Individual
 
         Me.ComboBox_Width.Visible = True
         Me.TextBox_Width.Visible = False
+
+        'CheckBox_3DModel.Checked = True
+        'CheckBox_3DModel.Enabled = False
     End Sub
 
     Private Sub Init_Multiple()
@@ -321,6 +324,8 @@ Public Class Individual
             If User_Input.addInstructions = True Then
                 If User_Input.addFrame = True AndAlso simplifiedWithFrameCreated = False Then
                     Multiple_3D_Simplified.Build_Grid(True)
+                ElseIf simplifiedWithFrameCreated = False Then
+                    Multiple_3D_Simplified.Build_Grid(False)
                 End If
                 If User_Input.addFrame = True Then
                     Instructions.Generate_Instructions(True)
@@ -330,8 +335,45 @@ Public Class Individual
             End If
 
         Else
-            Individual_3D.BuildGrating()
+            Dim frameCreated As Boolean = False
-            Individual_Drawing.Create_Model_For_Drawing()
+            If User_Input.add3DGrating = True Then
+                Individual_3D.BuildGrating()
+                frameCreated = True
+            End If
+
+            If User_Input.addGratingDrawing = True Then
+                Individual_Drawing.Generate_Drawing()
+            End If
+
+            Dim simplifiedWithFrameCreated As Boolean = False
+            If User_Input.addFrameDrawing = True Then
+                If frameCreated = False Then
+                    Individual_3D_Simplified.Build_Simplified(True)
+                    simplifiedWithFrameCreated = True
+                End If
+                For Each DR As DataRow In Frame_3D.frameDT.Rows
+                    If DR("TYPE") = "SIDE" Then
+                        Frame_3D.Generate_End_Frame_Pieces()
+                        Frame_Drawing.Create_Assemblies(simplifiedWithFrameCreated)
+                        Frame_Drawing.Generate_Drawings()
+                        Exit For
+                    End If
+                Next
+            End If
+
+            If User_Input.addInstructions = True Then
+                If User_Input.addFrame = True AndAlso simplifiedWithFrameCreated = False Then
+                    Individual_3D_Simplified.Build_Simplified(True)
+                ElseIf simplifiedWithFrameCreated = False Then
+                    Individual_3D_Simplified.Build_Simplified(False)
+                End If
+                If User_Input.addFrame = True Then
+                    Instructions.Generate_Instructions(True)
+                Else
+                    Instructions.Generate_Instructions(False)
+                End If
+            End If
+
         End If
     End Sub
 

Wardrobe/SolidWorks/Frame_Drawing.vb

@@ -17,7 +17,7 @@ Public Class Frame_Drawing
             If User_Input.add3DGrating = True Then
                 frameComponents = Individual_3D.partDT.Select("partType = 'frame_l_straight'")
             Else
-                'Finns inte -> FIXA, kan funka: frameComponents = Multiple_3D_Simplified.partDT.Select("partType = 'frame_l_straight'")
+                frameComponents = Individual_3D_Simplified.partDT.Select("partType = 'frame_l_straight'")
             End If
         End If
 

Wardrobe/SolidWorks/Individual_3D.vb

@@ -39,7 +39,9 @@ Public Class Individual_3D
             Inst_Recesses(parentID, gratingParameters, recessDR)
         Next
 
-        Frame_3D.Build_Frame(gratingParameters, parentID)
+        If User_Input.addFrame = True Then
+            Frame_3D.Build_Frame(gratingParameters, parentID)
+        End If
 
         importClass.copyGroupsByDataSet(ExternalClass.groupds_new)
         Dim grNr = groupClass.NewGroupID
@@ -50,16 +52,6 @@ Public Class Individual_3D
         Recess_Indent()
         Save_Assembly()
 
-        For Each DR As DataRow In Frame_3D.frameDT.Rows
-            If DR("TYPE") = "SIDE" Then
-                Frame_3D.Generate_End_Frame_Pieces()
-                Frame_Drawing.Create_Assemblies(False)  'Fixa False
-                Frame_Drawing.Generate_Drawings()
-                Exit For
-            End If
-        Next
-
-
     End Sub
 
     Private Shared Sub Save_Assembly()
@@ -68,45 +60,56 @@ Public Class Individual_3D
 
         Dim status As Integer
 
-        Dim sourcePath, destPath As String
+        Dim Assembly = swApp.ActiveDoc()
-        Dim childrenSourcePaths As New List(Of String)
+        Dim newName As String
-        Dim childrenDestPaths As New List(Of String)
+        newName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\grating_assembly.SLDASM"
 
-        sourcePath = Settings.filesFolder & "\Files\CADStart\" & designName & ".SLDASM"
+        Dim swExtensions As IModelDocExtension
-        destPath = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\GRATING_ASSEMBLY.SLDASM"
+        swExtensions = Assembly.Extension
+        Dim Errors As Integer
+        Dim Warnings As Integer
 
-        childrenSourcePaths.Add(Settings.HLCtFolder & "\HLCt\Parts\START.SLDPRT")
+        status = swExtensions.SaveAs2(newName, 0, 4, Nothing, "", True, Errors, Warnings)
-        childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\MASTER.SLDPRT")
 
-        Dim instanceCounter As New Dictionary(Of String, Integer)
+        'Dim sourcePath, destPath As String
-        For i = 0 To partDT.Rows.Count - 1
+        'Dim childrenSourcePaths As New List(Of String)
-            childrenSourcePaths.Add(Settings.filesFolder & "\Files\CADStart\" & partDT.Rows(i)("partName") & ".SLDPRT")
+        'Dim childrenDestPaths As New List(Of String)
 
-            Dim partName As String = partDT.Rows(i)("partName")
+        'sourcePath = Settings.filesFolder & "\Files\CADStart\" & designName & ".SLDASM"
-            Dim partNameArray As String() = partName.Split("_")
+        'destPath = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\GRATING_ASSEMBLY.SLDASM"
 
-            Dim newName As String = ""
+        'childrenSourcePaths.Add(Settings.HLCtFolder & "\HLCt\Parts\START.SLDPRT")
-            For j = 0 To partNameArray.Length - 4
+        'childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\MASTER.SLDPRT")
-                newName += partNameArray(j) & "_"
-            Next
 
-            Try
+        'Dim instanceCounter As New Dictionary(Of String, Integer)
-                instanceCounter(newName.Substring(0, newName.Length - 1)) += 1
+        'For i = 0 To partDT.Rows.Count - 1
-            Catch ex As Exception
+        '    childrenSourcePaths.Add(Settings.filesFolder & "\Files\CADStart\" & partDT.Rows(i)("partName") & ".SLDPRT")
-                instanceCounter.Add(newName.Substring(0, newName.Length - 1), 1)
-            End Try
 
-            If partNameArray(0) = "FRAME" Then
+        '    Dim partName As String = partDT.Rows(i)("partName")
-                childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_frames_sw") & "\" & newName &
+        '    Dim partNameArray As String() = partName.Split("_")
-                                  instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
-            Else
-                childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\" & newName &
-                                  instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
-            End If
-        Next
 
-        swApp.CloseAllDocuments(True)
+        '    Dim newName As String = ""
-        status = swApp.CopyDocument(sourcePath, destPath, childrenSourcePaths.ToArray(), childrenDestPaths.ToArray(), 2)
+        '    For j = 0 To partNameArray.Length - 4
+        '        newName += partNameArray(j) & "_"
+        '    Next
+
+        '    Try
+        '        instanceCounter(newName.Substring(0, newName.Length - 1)) += 1
+        '    Catch ex As Exception
+        '        instanceCounter.Add(newName.Substring(0, newName.Length - 1), 1)
+        '    End Try
+
+        '    If partNameArray(0) = "FRAME" Then
+        '        childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_frames_sw") & "\" & newName &
+        '                          instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
+        '    Else
+        '        childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\" & newName &
+        '                          instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
+        '    End If
+        'Next
+
+        'swApp.CloseAllDocuments(True)
+        'status = swApp.CopyDocument(sourcePath, destPath, childrenSourcePaths.ToArray(), childrenDestPaths.ToArray(), 2)
     End Sub
 
     Private Shared Sub Inst_Recesses(parentID As Integer, gratingParameters As DataRow, recessDR As DataRow)

Wardrobe/SolidWorks/Individual_3D_Simplified.vb

@@ -0,0 +1,460 @@
+Imports XCCLibrary
+Imports SldWorks
+Public Class Individual_3D_Simplified
+    Private Shared gratingParameters As DataRow
+    Private Shared designName As String
+    Public Shared partDT As New DataTable
+    Public Shared Sub Build_Simplified(withFrame As Boolean)
+        Dim exportTable As DataTable
+        exportTable = User_Input.Create_ExportTable()
+
+        XCCBaseClass.newDesign()
+        ExternalClass.PopulateTamplateXMLGroup()
+
+        Dim inst_ As Integer
+        Dim parentID As Integer = 0
+        gratingParameters = exportTable.Rows(0)
+
+        inst_ = ExternalClass.instantiate_parts(parentID, "simplified_floor_grating", "")
+        ExternalClass.modify_parameter_value("DP_GRATING_WIDTH", inst_, gratingParameters("WIDTH"))
+        ExternalClass.modify_parameter_value("DP_GRATING_LENGTH", inst_, gratingParameters("LENGTH"))
+        ExternalClass.modify_parameter_value("DP_LOADBAR_HEIGHT", inst_, gratingParameters("LOADBAR_HEIGHT"))
+        ExternalClass.modify_parameter_value("DP_OFFSET_X", inst_, 0)
+        ExternalClass.modify_parameter_value("DP_OFFSET_Y", inst_, 0)
+
+        parentID = inst_
+        For Each recessDR As DataRow In Data.recessData.Rows
+            Inst_Recesses(parentID, gratingParameters, recessDR)
+        Next
+
+        If withFrame = True Then
+            Frame_3D.Build_Frame(gratingParameters, parentID)
+        End If
+
+        importClass.copyGroupsByDataSet(ExternalClass.groupds_new)
+        Dim grNr = groupClass.NewGroupID
+        Dim designTable = designModel.selectDesign("*")
+        designName = designTable.rows(0)("designName")
+        groupClass.InstantiateGroup(designName, grNr, "START")
+
+        Recess_Indent()
+        Save_Assembly(withFrame)
+    End Sub
+
+    Private Shared Sub Save_Assembly(withFrame As Boolean)
+        Dim swApp As SldWorks.SldWorks
+        swApp = CType(System.Runtime.InteropServices.Marshal.GetActiveObject("SldWorks.Application"), SldWorks.SldWorks)
+
+        Dim status As Integer
+
+        Dim Assembly = swApp.ActiveDoc()
+
+        Dim config As Configuration
+        config = Assembly.GetActiveConfiguration
+        Dim swCustPropMgr = config.CustomPropertyManager
+        If withFrame = True Then
+            status = swCustPropMgr.Add3("Benämning", 30, "Placement instructions for assembly", 1)
+            status = swCustPropMgr.Add3("ExtraBenämning1", 30, "", 1)
+            status = swCustPropMgr.Add3("ExtraBenämning2", 30, "", 1)
+            status = swCustPropMgr.Add3("Materialsort", 30, "", 1)
+        Else
+            status = swCustPropMgr.Add3("Benämning", 30, "Floor grating " & User_Input.gratingMesh & " " & User_Input.gratingHeight & "/" & User_Input.loadBarThickness, 1)
+            status = swCustPropMgr.Add3("ExtraBenämning1", 30, "LxW " & Data.gratingL & "x" & Data.gratingW, 1)
+            If User_Input.gratingSerrated Then
+                status = swCustPropMgr.Add3("ExtraBenämning2", 30, "Serrated", 1)
+            Else
+                status = swCustPropMgr.Add3("ExtraBenämning2", 30, "", 1)
+            End If
+            If User_Input.gratingLacquered Then
+                status = swCustPropMgr.Add3("Materialsort", 30, User_Input.gratingMaterial & " (Lacquered)", 1)
+            Else
+                status = swCustPropMgr.Add3("Materialsort", 30, User_Input.gratingMaterial, 1)
+            End If
+        End If
+
+        status = swCustPropMgr.Add3("Art. Nr", 30, "TBD", 1)
+        status = swCustPropMgr.Add3("Material_Art", 30, "TBD", 1)
+
+        status = swCustPropMgr.Add3("Author", 30, "", 1)
+        status = swCustPropMgr.Add3("Ändrad av", 30, "", 1)
+        status = swCustPropMgr.Add3("SkapadDatum", 30, "", 1)
+        status = swCustPropMgr.Add3("RevideradDatum", 30, "", 1)
+
+        status = swCustPropMgr.Add3("epdmid", 30, "", 1)
+        status = swCustPropMgr.Add3("Revision", 30, "", 1)
+
+
+        Dim newName As String
+        If withFrame = True Then
+            newName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\grating_assembly_simplified_with_frame.SLDASM"
+        Else
+            newName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\grating_assembly_simplified.SLDASM"
+        End If
+        Dim swExtensions As IModelDocExtension
+        swExtensions = Assembly.Extension
+        Dim Errors As Integer
+        Dim Warnings As Integer
+
+        status = swExtensions.SaveAs2(newName, 0, 4, Nothing, "", True, Errors, Warnings)
+
+
+
+        'Dim sourcePath, destPath As String
+        'Dim childrenSourcePaths As New List(Of String)
+        'Dim childrenDestPaths As New List(Of String)
+
+        'sourcePath = Settings.filesFolder & "\Files\CADStart\" & designName & ".SLDASM"
+        'destPath = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\GRATING_ASSEMBLY.SLDASM"
+
+        'childrenSourcePaths.Add(Settings.HLCtFolder & "\HLCt\Parts\START.SLDPRT")
+        'childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\MASTER.SLDPRT")
+
+        'Dim instanceCounter As New Dictionary(Of String, Integer)
+        'For i = 0 To partDT.Rows.Count - 1
+        '    childrenSourcePaths.Add(Settings.filesFolder & "\Files\CADStart\" & partDT.Rows(i)("partName") & ".SLDPRT")
+
+        '    Dim partName As String = partDT.Rows(i)("partName")
+        '    Dim partNameArray As String() = partName.Split("_")
+
+        '    Dim newName As String = ""
+        '    For j = 0 To partNameArray.Length - 4
+        '        newName += partNameArray(j) & "_"
+        '    Next
+
+        '    Try
+        '        instanceCounter(newName.Substring(0, newName.Length - 1)) += 1
+        '    Catch ex As Exception
+        '        instanceCounter.Add(newName.Substring(0, newName.Length - 1), 1)
+        '    End Try
+
+        '    If partNameArray(0) = "FRAME" Then
+        '        childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_frames_sw") & "\" & newName &
+        '                          instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
+        '    Else
+        '        childrenDestPaths.Add(Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw") & "\" & newName &
+        '                          instanceCounter(newName.Substring(0, newName.Length - 1)) & ".SLDPRT")
+        '    End If
+        'Next
+
+        'swApp.CloseAllDocuments(True)
+        'status = swApp.CopyDocument(sourcePath, destPath, childrenSourcePaths.ToArray(), childrenDestPaths.ToArray(), 2)
+    End Sub
+
+    Private Shared Sub Inst_Recesses(parentID As Integer, gratingParameters As DataRow, recessDR As DataRow)
+        Dim inst_ As Integer
+
+        If recessDR("RECESS TYPE") = "SQUARE" Then
+            Dim squareL As Integer = recessDR("LENGTH") + gratingParameters("LOADBAR_THICKNESS")
+            Dim squareW As Integer = recessDR("WIDTH") + gratingParameters("LOADBAR_THICKNESS")
+
+            inst_ = ExternalClass.instantiate_parts(parentID, "recess_rectangle", "")
+
+            ExternalClass.modify_parameter_value("DP_LENGTH", inst_, squareL)
+            ExternalClass.modify_parameter_value("DP_WIDTH", inst_, squareW)
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_HEIGHT", inst_, gratingParameters("LOADBAR_HEIGHT"))
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_THICKNESS", inst_, gratingParameters("LOADBAR_THICKNESS"))
+
+            If recessDR("CORNER") = 1 Then
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH") - squareW)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, 0)
+
+                'Position
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_POS", inst_, squareL - gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_BOTTOM", inst_, gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_H_EDGEBAR_POS", inst_, 0)
+
+            ElseIf recessDR("CORNER") = 2 Then
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH") - squareW)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH") - squareL)
+
+                'Position
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_POS", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_BOTTOM", inst_, gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_H_EDGEBAR_POS", inst_, 0)
+
+            ElseIf recessDR("CORNER") = 3 Then
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH") - squareL)
+
+                'Position
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_POS", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_BOTTOM", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_H_EDGEBAR_POS", inst_, squareW - gratingParameters("LOADBAR_THICKNESS"))
+            Else
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, 0)
+
+                'Position
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_POS", inst_, squareL - gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_V_EDGEBAR_BOTTOM", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_H_EDGEBAR_POS", inst_, squareW - gratingParameters("LOADBAR_THICKNESS"))
+            End If
+
+        ElseIf recessDR("RECESS TYPE") = "ANGLE" Then
+            inst_ = ExternalClass.instantiate_parts(parentID, "recess_angle", "")
+
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_HEIGHT", inst_, gratingParameters("LOADBAR_HEIGHT"))
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_THICKNESS", inst_, gratingParameters("LOADBAR_THICKNESS"))
+
+            If recessDR("CORNER") = 1 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 90)
+
+            ElseIf recessDR("CORNER") = 2 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 180)
+
+            ElseIf recessDR("CORNER") = 3 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 270)
+
+            Else
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 0)
+
+            End If
+
+        ElseIf recessDR("RECESS TYPE") = "SIDE SQUARE" Then
+            inst_ = ExternalClass.instantiate_parts(parentID, "recess_side_square", "")
+
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_HEIGHT", inst_, gratingParameters("LOADBAR_HEIGHT"))
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_THICKNESS", inst_, gratingParameters("LOADBAR_THICKNESS"))
+
+            If recessDR("SIDE") = 1 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("WIDTH") - 2)
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH") - 2)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, recessDR("OFFSET") - gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 90)
+
+            ElseIf recessDR("SIDE") = 2 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, gratingParameters("WIDTH") - recessDR("OFFSET") + gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 180)
+
+            ElseIf recessDR("SIDE") = 3 Then
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("WIDTH") - 2)
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, 0 + 2)
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, gratingParameters("LENGTH") - recessDR("OFFSET") + gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 270)
+
+            Else
+                ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("LENGTH"))
+                ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("WIDTH"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, recessDR("OFFSET") - gratingParameters("LOADBAR_THICKNESS"))
+                ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, 0)
+                ExternalClass.modify_parameter_value("DP_ROTATION", inst_, 0)
+
+            End If
+
+        ElseIf recessDR("RECESS TYPE") = "MIDDLE SQUARE" Then
+            inst_ = ExternalClass.instantiate_parts(parentID, "recess_middle_square", "")
+
+            ExternalClass.modify_parameter_value("DP_LENGTH", inst_, recessDR("LENGTH") + gratingParameters("LOADBAR_THICKNESS") * 2)
+            ExternalClass.modify_parameter_value("DP_WIDTH", inst_, recessDR("WIDTH") + gratingParameters("LOADBAR_THICKNESS") * 2)
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_HEIGHT", inst_, gratingParameters("LOADBAR_HEIGHT"))
+            ExternalClass.modify_parameter_value("DP_EDGEBAR_THICKNESS", inst_, gratingParameters("LOADBAR_THICKNESS"))
+            ExternalClass.modify_parameter_value("DP_OFFSET_W", inst_, recessDR("OFFSET Y") - gratingParameters("LOADBAR_THICKNESS"))
+            ExternalClass.modify_parameter_value("DP_OFFSET_L", inst_, recessDR("OFFSET X") - gratingParameters("LOADBAR_THICKNESS"))
+        End If
+
+
+    End Sub
+
+    Private Shared Sub Recess_Indent()
+        Dim swApp As SldWorks.SldWorks
+        swApp = CType(System.Runtime.InteropServices.Marshal.GetActiveObject("SldWorks.Application"), SldWorks.SldWorks)
+
+        Dim boolstatus As Boolean
+        Dim AssemblyExtension As SldWorks.ModelDocExtension
+
+        Dim Assembly = swApp.ActiveDoc
+        Dim SelMgr = Assembly.SelectionManager()
+        AssemblyExtension = Assembly.Extension
+        Dim sldata = SelMgr.CreateSelectData
+
+        Dim swErrors As Integer
+        Dim swWarnings As Integer
+        Dim components = Assembly.GetComponents(True)
+
+        partDT = partModel.selectPart("*")
+
+        Assembly.ClearSelection2(True)
+
+        ' Grating part
+        Dim gratingPartName As String = partDT.Rows(0)("partName")
+        boolstatus = AssemblyExtension.SelectByID2(gratingPartName & "-1@" & designName, "COMPONENT", 0, 0, 0, False, 0, Nothing, 0)
+        Dim gratingPart = SelMgr.GetSelectedObject6(1, -1)
+
+        Assembly.EditPart
+
+        Dim modelDoc As IModelDoc2
+        modelDoc = Assembly
+        boolstatus = AssemblyExtension.SelectByID2("HorizontalSplitBody@" & gratingPartName & "-1@" & designName, "BODYFEATURE", 0, 0, 0, False, 0, Nothing, 0)
+        modelDoc.EditSuppress2()
+        boolstatus = AssemblyExtension.SelectByID2("VerticalSplitBody@" & gratingPartName & "-1@" & designName, "BODYFEATURE", 0, 0, 0, False, 0, Nothing, 0)
+        modelDoc.EditSuppress2()
+
+        Dim indexGrating As Integer
+        For i = 0 To components.Length - 1
+            If components(i).Name2 = gratingPartName & "-1" Then
+                indexGrating = i
+                Exit For
+            End If
+        Next
+
+        Dim gratingComponent As SldWorks.Component2 = components(indexGrating)
+        Dim gratingBodies = components(indexGrating).GetBodies2(0)
+
+        Dim recessParts = partDT.Select("parentName = '" & gratingPartName & "'")
+        'Dim recessParts As DataTable = New DataTable
+        'For Each DR As DataRow In partDT.Rows
+        '    Dim partName As String = DR("partName")
+        '    If partName.Split("_")(0) = "RECESS" Then
+        '        recessParts.Rows.Add(DR)
+        '    End If
+        'Next
+
+
+
+        Dim recessPartName As String
+        For i = 0 To recessParts.Count - 1
+            Dim partName As String = recessParts(i)("partName")
+            If partName.Split("_")(0) = "RECESS" Then
+                Assembly.ClearSelection2(True)
+
+                ' Recess part
+                recessPartName = partName
+                boolstatus = AssemblyExtension.SelectByID2(recessPartName & "-1@" & designName, "COMPONENT", 0, 0, 0, False, 0, Nothing, 0)
+                Dim recessPart = SelMgr.GetSelectedObject6(1, -1)
+
+                Dim indexRecess As Integer
+                For j = 0 To components.Length - 1
+                    If components(j).Name2 = recessPartName & "-1" Then
+                        indexRecess = j
+                        Exit For
+                    End If
+                Next
+
+                Dim recessBodies = components(indexRecess).GetBodies2(0)
+                Dim recessComponent As SldWorks.Component2 = components(indexRecess)
+                Dim bodiesToCut = Check_Interference(gratingComponent, recessComponent)
+
+                For j = 0 To bodiesToCut.Length - 1
+                    sldata.Mark = 1
+
+                    Dim bodyName As String = bodiesToCut(j).Name & "@" & gratingPartName & "-1@" & designName
+                    boolstatus = AssemblyExtension.SelectByID2(bodyName, "SOLIDBODY", 0, 0, 0, True, 1, Nothing, 0)
+
+                    sldata.Mark = 4
+
+                    Dim indexBody As Integer
+                    For k = 0 To recessBodies.Length - 1
+                        If recessBodies(k).Name = "Cut-Body" Then
+                            indexBody = k
+                            Exit For
+                        End If
+                    Next
+
+                    Dim recessFace = recessBodies(indexBody).GetFirstFace
+                    recessFace.Select4(True, sldata)
+
+                    Assembly.FeatureManager.InsertIndent(0.01, 0, False, True, True, False)
+                    Assembly.ClearSelection2(True)
+                Next
+            End If
+        Next
+
+
+        If gratingParameters("TYPE") = "pressure_welded_serrated" Then
+            For i = 1 To 5
+                boolstatus = AssemblyExtension.SelectByID2("Serrated-Cut" & i & "@" & gratingPartName & "-1@" & designName, "BODYFEATURE", 0, 0, 0, False, 0, Nothing, 0)
+                modelDoc.EditUnsuppress2()
+            Next
+
+        ElseIf gratingParameters("TYPE") = "type_a_serrated" Then
+            For i = 1 To 2
+                boolstatus = AssemblyExtension.SelectByID2("Serrated-Cut" & i & "@" & gratingPartName & "-1@" & designName, "BODYFEATURE", 0, 0, 0, False, 0, Nothing, 0)
+                modelDoc.EditUnsuppress2()
+            Next
+        End If
+
+
+        Assembly.EditAssembly
+
+        components = Assembly.GetComponents(True)
+        For i = 0 To UBound(components)
+            Dim partDoc = components(i).GetModelDoc2()
+            boolstatus = partDoc.Save3(1, swErrors, swWarnings)
+        Next
+        boolstatus = Assembly.Save3(1, swErrors, swWarnings)
+    End Sub
+
+    Private Shared Function Check_Interference(comp1 As SldWorks.Component2, comp2 As SldWorks.Component2) ' Test Albins mocro för interference
+
+        Dim swApp As SldWorks.SldWorks
+        Dim swModel As SldWorks.ModelDoc2
+        Dim swAssy As SldWorks.AssemblyDoc
+        Dim CompArray(1) As SldWorks.Component2
+        Dim vCompArray
+        Dim vIntCompArray
+        Dim vIntFaceArray
+
+        Dim interfering
+
+        swApp = CType(System.Runtime.InteropServices.Marshal.GetActiveObject("SldWorks.Application"), SldWorks.SldWorks)
+        swModel = swApp.ActiveDoc
+        swAssy = swModel
+
+        CompArray(0) = comp1
+        CompArray(1) = comp2
+
+        vCompArray = CompArray
+        swAssy.ToolsCheckInterference2(2, (vCompArray), interfering, vIntCompArray, vIntFaceArray)
+
+        Dim Bodies(UBound(vIntFaceArray)) As Object
+        Dim BodyNames(UBound(vIntFaceArray)) As String
+        Dim CompNames(UBound(vIntFaceArray)) As String
+
+        For i = 0 To UBound(vIntFaceArray)
+
+            Bodies(i) = vIntFaceArray(i).GetBody
+            BodyNames(i) = Bodies(i).Name
+            CompNames(i) = vIntCompArray(i).Name2
+
+        Next
+
+        Dim gratingName As String = CompNames(0)
+        Dim bodiesToCutList As New List(Of Object)
+
+        bodiesToCutList.Add(Bodies(0))
+        For i = 1 To CompNames.Length - 1
+
+            If CompNames(i) <> gratingName Then
+                Exit For
+            ElseIf BodyNames(i) <> BodyNames(i - 1) Then
+                bodiesToCutList.Add(Bodies(i))
+            End If
+        Next
+
+        Dim bodiesToCut() As Object
+        bodiesToCut = bodiesToCutList.ToArray()
+
+        Return bodiesToCut
+    End Function
+End Class

Wardrobe/SolidWorks/Individual_Drawing.vb

@@ -2,7 +2,7 @@
 Public Class Individual_Drawing
     Private Shared sideCounter As Integer()
 
-    Public Shared Sub Create_Model_For_Drawing()
+    Public Shared Sub Generate_Drawing()
         Dim pointTable As DataTable
         pointTable = Data.gratingPoints
 
@@ -149,6 +149,7 @@ Public Class Individual_Drawing
         longstatus = iPart.SaveAs3(newName, 0, 0)
 
         Model.ClearSelection2(True)
+
         Create_Drawing(iPart)
     End Sub
 
@@ -330,16 +331,17 @@ Public Class Individual_Drawing
         Dim skSegment As Object
 
         swSkMgr.AddToDB = True
-
+        Dim sheetScale = myView.ScaleDecimal
-        For i = 0 To Draw_Grating.DirSymbolPoints.Count - 1
+        For i = 0 To Draw_Grating.DirSymbolPoints.Count - 2
             Dim x1, x2, y1, y2 As Double
-            x1 = CDbl(CInt(Draw_Grating.DirSymbolPoints(i)(0) - Data.guiPanelMidX) / (30 * viewScale2))
+            x1 = CDbl(CInt(Draw_Grating.DirSymbolPoints(i)(0) - Data.guiPanelMidX) / (3000 * sheetScale))
-            y1 = -CDbl(CInt(Draw_Grating.DirSymbolPoints(i)(1) - Data.guiPanelMidY) / (30 * viewScale2))
+            y1 = -CDbl(CInt(Draw_Grating.DirSymbolPoints(i)(1) - Data.guiPanelMidY) / (3000 * sheetScale))
-            x2 = CDbl(CInt(Draw_Grating.DirSymbolPoints(i + 1)(0) - Data.guiPanelMidX) / (30 * viewScale2))
+            x2 = CDbl(CInt(Draw_Grating.DirSymbolPoints(i + 1)(0) - Data.guiPanelMidX) / (3000 * sheetScale))
-            y2 = -CDbl(CInt(Draw_Grating.DirSymbolPoints(i + 1)(1) - Data.guiPanelMidY) / (30 * viewScale2))
+            y2 = -CDbl(CInt(Draw_Grating.DirSymbolPoints(i + 1)(1) - Data.guiPanelMidY) / (3000 * sheetScale))
 
             skSegment = swSkMgr.CreateLine(x1, y1, 0, x2, y2, 0)
         Next
+
         swSkMgr.AddToDB = False
         longstatus = iDrawing.SaveAs3(newName, 0, 0)
         longstatus = iDrawing.SaveAs3(Settings.folderPaths("object_" & Data.objectNum & "_drawings_gratings_pdf") & "\grating_drawing.pdf", 0, 2)

Wardrobe/SolidWorks/Instructions.vb

@@ -26,12 +26,21 @@ Public Class Instructions
         status = layMgr.SetCurrentLayer("Svenska")
 
         Dim drawName As String
-        If withFrame = True Then
+        If AppForm.fillMode = True Then
-            drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\gratings_assembly_simplified_with_frame.SLDASM"
+            If withFrame = True Then
+                drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\gratings_assembly_simplified_with_frame.SLDASM"
+            Else
+                drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\gratings_assembly_simplified.SLDASM"
+            End If
         Else
-            drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\gratings_assembly_simplified.SLDASM"
+            If withFrame = True Then
+                drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\grating_assembly_simplified_with_frame.SLDASM"
+            Else
+                drawName = Settings.folderPaths("object_" & Data.objectNum & "_models3D_gratings_sw_support") & "\grating_assembly_simplified.SLDASM"
+            End If
         End If
 
+
         Dim myView As View
         myView = iDrawing.CreateDrawViewFromModelView3(drawName, "*Front", swSheetWidth / 2, swSheetHeight / 2, 0)
         myView.UseSheetScale() = True
@@ -68,9 +77,14 @@ Public Class Instructions
         vNotes = iDrawing.AutoBalloon5(autoBalloonParams)
         iDrawing.ClearSelection2(True)
 
-        Dim gratingCounter As Integer = Grating_Fill.numOfHorizontal * Grating_Fill.numOfVertical - Multiple_3D_Simplified.listOfObsolete.Count
+        Dim numOfGratings = 1
+        If AppForm.fillMode = True Then
+            numOfGratings = Grating_Fill.numOfHorizontal * Grating_Fill.numOfVertical - Multiple_3D_Simplified.listOfObsolete.Count
+        End If
+
+        Dim gratingCounter As Integer = numOfGratings
         For i = vNotes.Length - 1 To 0 Step -1
-            If i < Grating_Fill.numOfHorizontal * Grating_Fill.numOfVertical - Multiple_3D_Simplified.listOfObsolete.Count Then
+            If i < numOfGratings Then
                 Dim noteInfo = vNotes(i).GetLeaderInfo()
 
                 noteAnnotation = vNotes(i).GetAnnotation()
@@ -95,100 +109,133 @@ Public Class Instructions
             End If
         Next
 
-        Dim straightFrames = Frame_3D.frameDT.Select("TYPE = 'SIDE'")
+        If withFrame = True Then
-        Dim straightFramesDT As New DataTable
+            Dim straightFrames = Frame_3D.frameDT.Select("TYPE = 'SIDE'")
-        straightFramesDT.Columns.Add("LENGTH", GetType(Integer))
+            Dim straightFramesDT As New DataTable
-        straightFramesDT.Columns.Add("SIDE", GetType(Integer))
+            straightFramesDT.Columns.Add("LENGTH", GetType(Integer))
-        For i = 1 To 4
+            straightFramesDT.Columns.Add("SIDE", GetType(Integer))
-            Dim sideNum = i + 1
+            For i = 1 To 4
-            If sideNum = 5 Then
+                Dim sideNum = i + 1
-                sideNum = 1
+                If sideNum = 5 Then
-            End If
+                    sideNum = 1
-            For j = straightFrames.Length - 1 To 0 Step -1
+                End If
-                Dim DR As DataRow = straightFrames(j)
+                For j = straightFrames.Length - 1 To 0 Step -1
-                If DR("SIDE") = sideNum Then
+                    Dim DR As DataRow = straightFrames(j)
-                    Dim newDR As DataRow = straightFramesDT.NewRow
+                    If DR("SIDE") = sideNum Then
-                    newDR("LENGTH") = DR("LENGTH")
+                        Dim newDR As DataRow = straightFramesDT.NewRow
-                    newDR("SIDE") = i
+                        newDR("LENGTH") = DR("LENGTH")
-                    straightFramesDT.Rows.Add(newDR)
+                        newDR("SIDE") = i
+                        straightFramesDT.Rows.Add(newDR)
+                    End If
+                Next
+            Next
+
+            Dim sideOffsets(3) As Double
+            Dim cornerFrames = Frame_3D.frameDT.Select("TYPE = 'CORNER'")
+            For i = 0 To 3
+                Dim cornerFrameExist As Boolean = False
+                For j = 0 To cornerFrames.Length - 1
+                    If cornerFrames(j)("CORNER") = i + 1 Then
+                        cornerFrameExist = True
+                        Exit For
+                    End If
+                Next
+                If cornerFrameExist = True Then
+                    sideOffsets(i) = 0.21
+                Else
+                    sideOffsets(i) = 0
                 End If
             Next
-        Next
 
-        Dim sideOffsets(3) As Double
+            Dim worldX, worldY, offsetX, offsetY As Double
-        Dim cornerFrames = Frame_3D.frameDT.Select("TYPE = 'CORNER'")
+            Dim scale As Double = myView.ScaleDecimal
-        For i = 0 To 3
+            For i = 0 To straightFramesDT.Rows.Count - 1
-            Dim cornerFrameExist As Boolean = False
+                If straightFramesDT.Rows(i)("SIDE") = 1 Then
-            For j = 0 To cornerFrames.Length
+                    worldX = swSheetWidth / 2 + (-(Data.gratingL / 1000) / 2 + sideOffsets(0) + (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
-                If cornerFrames(j)("CORNER") = i + 1 Then
+                    sideOffsets(0) += straightFramesDT.Rows(i)("LENGTH") / 1000
-                    cornerFrameExist = True
+                    worldY = swSheetHeight / 2 + ((Data.gratingW / 1000) / 2 + 0.001) * scale
-                    Exit For
+                    offsetX = worldX - 0.01 - 0.0045
+                    offsetY = worldY + 0.02 + 0.0015
+                ElseIf straightFramesDT.Rows(i)("SIDE") = 2 Then
+                    worldX = swSheetWidth / 2 + ((Data.gratingL / 1000) / 2 + 0.001) * scale
+                    worldY = swSheetHeight / 2 + ((Data.gratingW / 1000) / 2 - sideOffsets(1) - (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
+                    sideOffsets(1) += straightFramesDT.Rows(i)("LENGTH") / 1000
+                    offsetX = worldX + 0.02 - 0.0045
+                    offsetY = worldY + 0.01 + 0.0015
+                ElseIf straightFramesDT.Rows(i)("SIDE") = 3 Then
+                    worldX = swSheetWidth / 2 + ((Data.gratingL / 1000) / 2 - sideOffsets(2) - (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
+                    sideOffsets(2) += straightFramesDT.Rows(i)("LENGTH") / 1000
+                    worldY = swSheetHeight / 2 - ((Data.gratingW / 1000) / 2 + 0.001) * scale
+                    offsetX = worldX + 0.01 - 0.0045
+                    offsetY = worldY - 0.02 + 0.0015
+                Else
+                    worldX = swSheetWidth / 2 - ((Data.gratingL / 1000) / 2 + 0.001) * scale
+                    worldY = swSheetHeight / 2 + (-(Data.gratingW / 1000) / 2 + sideOffsets(3) + (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
+                    sideOffsets(3) += straightFramesDT.Rows(i)("LENGTH") / 1000
+                    offsetX = worldX - 0.02 - 0.0045
+                    offsetY = worldY - 0.01 + 0.0015
                 End If
+
+                status = swExtensions.SelectByRay(worldX, worldY, 0, 0, 0, -1, 0.0005, 2, False, 0, 0)
+
+                Dim BomBalloonParams As Object
+                BomBalloonParams = swExtensions.CreateBalloonOptions()
+                BomBalloonParams.Style = 1
+                BomBalloonParams.Size = 3
+                BomBalloonParams.UpperTextContent = 1
+                BomBalloonParams.UpperText = """"
+                BomBalloonParams.ShowQuantity = False
+                BomBalloonParams.QuantityPlacement = 1
+                BomBalloonParams.QuantityDenotationText = "X"
+                BomBalloonParams.QuantityOverride = False
+                Dim myNote = swExtensions.InsertBOMBalloon2(BomBalloonParams)
+
+                noteAnnotation = myNote.GetAnnotation()
+
+                textFormat = noteAnnotation.GetTextFormat(0)
+                textFormat.CharHeight = 0.0025
+                status = noteAnnotation.SetTextFormat(0, False, textFormat)
+
+                noteAnnotation.SetPosition2(offsetX, offsetY, 0)
+
+                iDrawing.ClearSelection2(True)
+                balloonName = myNote.GetName()
+                status = swExtensions.SelectByID2(balloonName & "@" & myView.GetName2, "NOTE", 0, 0, 0, False, 0, Nothing, 0)
+                editedNote = swExtensions.EditBalloonProperties2(1, 3, 0, "F-" & i + 1, 0, "", 0, False, 1, "X", 0.001)
             Next
-            If cornerFrameExist = True Then
+        End If
-                sideOffsets(i) = 0.21
+
-            Else
+
-                sideOffsets(i) = 0
+        status = layMgr.AddLayer("Symbol", "", 0, 0, 2)
-            End If
+        status = layMgr.SetCurrentLayer("Symbol")
+
+        Dim swSkMgr As SketchManager
+        swSkMgr = iDrawing.SketchManager
+        status = iDrawing.ActivateSheet("Sheet1")
+        Dim skSegment As Object
+
+        swSkMgr.AddToDB = True
+        Dim sheetProp = swSheet.GetProperties()
+        Dim sheetScale = myView.ScaleDecimal
+        For i = 0 To Draw_Grating.DirSymbolPoints.Count - 2
+            Dim x1, x2, y1, y2 As Double
+            x1 = CDbl((Draw_Grating.DirSymbolPoints(i)(0) - Data.guiPanelMidX) / (2000 * sheetScale)) + (swSheetWidth - 0.05) / sheetScale
+            y1 = -CDbl((Draw_Grating.DirSymbolPoints(i)(1) - Data.guiPanelMidY) / (2000 * sheetScale)) + (swSheetHeight / 2) / sheetScale
+            x2 = CDbl((Draw_Grating.DirSymbolPoints(i + 1)(0) - Data.guiPanelMidX) / (2000 * sheetScale)) + (swSheetWidth - 0.05) / sheetScale
+            y2 = -CDbl((Draw_Grating.DirSymbolPoints(i + 1)(1) - Data.guiPanelMidY) / (2000 * sheetScale)) + (swSheetHeight / 2) / sheetScale
+
+            skSegment = swSkMgr.CreateLine(x1, y1, 0, x2, y2, 0)
         Next
+        swSkMgr.AddToDB = False
 
-        Dim worldX, worldY, offsetX, offsetY As Double
+        Dim note = iDrawing.CreateText2("Load Bearing Direction", (swSheetWidth - 0.072), (swSheetHeight / 2 + 0.012), 0, 0.003, 0)
-        Dim scale As Double = myView.ScaleDecimal
-        For i = 0 To straightFramesDT.Rows.Count - 1
-            If straightFramesDT.Rows(i)("SIDE") = 1 Then
-                worldX = swSheetWidth / 2 + (-(Data.gratingL / 1000) / 2 + sideOffsets(0) + (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
-                sideOffsets(0) += straightFramesDT.Rows(i)("LENGTH") / 1000
-                worldY = swSheetHeight / 2 + ((Data.gratingW / 1000) / 2 + 0.001) * scale
-                offsetX = worldX - 0.01 - 0.0045
-                offsetY = worldY + 0.02 + 0.0015
-            ElseIf straightFramesDT.Rows(i)("SIDE") = 2 Then
-                worldX = swSheetWidth / 2 + ((Data.gratingL / 1000) / 2 + 0.001) * scale
-                worldY = swSheetHeight / 2 + ((Data.gratingW / 1000) / 2 - sideOffsets(1) - (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
-                sideOffsets(1) += straightFramesDT.Rows(i)("LENGTH") / 1000
-                offsetX = worldX + 0.02 - 0.0045
-                offsetY = worldY + 0.01 + 0.0015
-            ElseIf straightFramesDT.Rows(i)("SIDE") = 3 Then
-                worldX = swSheetWidth / 2 + ((Data.gratingL / 1000) / 2 - sideOffsets(2) - (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
-                sideOffsets(2) += straightFramesDT.Rows(i)("LENGTH") / 1000
-                worldY = swSheetHeight / 2 - ((Data.gratingW / 1000) / 2 + 0.001) * scale
-                offsetX = worldX + 0.01 - 0.0045
-                offsetY = worldY - 0.02 + 0.0015
-            Else
-                worldX = swSheetWidth / 2 - ((Data.gratingL / 1000) / 2 + 0.001) * scale
-                worldY = swSheetHeight / 2 + (-(Data.gratingW / 1000) / 2 + sideOffsets(3) + (straightFramesDT.Rows(i)("LENGTH") / 1000) / 2) * scale
-                sideOffsets(3) += straightFramesDT.Rows(i)("LENGTH") / 1000
-                offsetX = worldX - 0.02 - 0.0045
-                offsetY = worldY - 0.01 + 0.0015
-            End If
 
-            status = swExtensions.SelectByRay(worldX, worldY, 0, 0, 0, -1, 0.0005, 2, False, 0, 0)
 
-            Dim BomBalloonParams As Object
+        Dim newName As String
-            BomBalloonParams = swExtensions.CreateBalloonOptions()
+        newName = Settings.folderPaths("object_" & Data.objectNum & "_guide") & "\assembly_instructions.SLDDRW"
-            BomBalloonParams.Style = 1
-            BomBalloonParams.Size = 3
-            BomBalloonParams.UpperTextContent = 1
-            BomBalloonParams.UpperText = """"
-            BomBalloonParams.ShowQuantity = False
-            BomBalloonParams.QuantityPlacement = 1
-            BomBalloonParams.QuantityDenotationText = "X"
-            BomBalloonParams.QuantityOverride = False
-            Dim myNote = swExtensions.InsertBOMBalloon2(BomBalloonParams)
-
-            noteAnnotation = myNote.GetAnnotation()
-
-            textFormat = noteAnnotation.GetTextFormat(0)
-            textFormat.CharHeight = 0.0025
-            status = noteAnnotation.SetTextFormat(0, False, textFormat)
-
-            noteAnnotation.SetPosition2(offsetX, offsetY, 0)
-
-            iDrawing.ClearSelection2(True)
-            balloonName = myNote.GetName()
-            status = swExtensions.SelectByID2(balloonName & "@" & myView.GetName2, "NOTE", 0, 0, 0, False, 0, Nothing, 0)
-            editedNote = swExtensions.EditBalloonProperties2(1, 3, 0, "F-" & i + 1, 0, "", 0, False, 1, "X", 0.001)
-        Next
 
+        status = iDrawing.SaveAs3(newName, 0, 0)
+        status = iDrawing.SaveAs3(newName, 0, 2)
     End Sub
 
 End Class

Wardrobe/SolidWorks/Multiple_Drawing.vb

@@ -272,18 +272,6 @@ Public Class Multiple_Drawing
             End If
         Next
 
-        'recessData.Columns.Add("RECESS TYPE", GetType(String))
-        'recessData.Columns.Add("NAME", GetType(String))
-        'recessData.Columns.Add("CORNER", GetType(Integer))
-        'recessData.Columns.Add("SIDE", GetType(Integer))
-        'recessData.Columns.Add("WIDTH", GetType(Integer))
-        'recessData.Columns.Add("LENGTH", GetType(Integer))
-        'recessData.Columns.Add("OFFSET", GetType(Integer))
-        'recessData.Columns.Add("OFFSET X", GetType(Integer))
-        'recessData.Columns.Add("OFFSET Y", GetType(Integer))
-        'recessData.Columns.Add("GRATINGS", GetType(List(Of Integer)))
-
-
         ' -- Loop Horizontal --
         For i = 0 To Grating_Fill.numOfHorizontal - 1
             status = False
@@ -387,19 +375,19 @@ Public Class Multiple_Drawing
 
         swSkMgr.AddToDB = True
         Dim sheetProp = swSheet.GetProperties()
-        Dim sheetScale = sheetProp(3)
+        Dim sheetScale = myView.ScaleDecimal
         For i = 0 To Draw_Grating.DirSymbolPoints.Count - 2
             Dim x1, x2, y1, y2 As Double
-            x1 = CDbl((Draw_Grating.DirSymbolPoints(i)(0) - Data.guiPanelMidX) / 200) + (swSheetWidth - 0.05) * sheetScale
+            x1 = CDbl((Draw_Grating.DirSymbolPoints(i)(0) - Data.guiPanelMidX) / (2000 * sheetScale)) + (swSheetWidth - 0.05) / sheetScale
-            y1 = -CDbl((Draw_Grating.DirSymbolPoints(i)(1) - Data.guiPanelMidY) / 200) + (swSheetHeight / 2) * sheetScale
+            y1 = -CDbl((Draw_Grating.DirSymbolPoints(i)(1) - Data.guiPanelMidY) / (2000 * sheetScale)) + (swSheetHeight / 2) / sheetScale
-            x2 = CDbl((Draw_Grating.DirSymbolPoints(i + 1)(0) - Data.guiPanelMidX) / 200) + (swSheetWidth - 0.05) * sheetScale
+            x2 = CDbl((Draw_Grating.DirSymbolPoints(i + 1)(0) - Data.guiPanelMidX) / (2000 * sheetScale)) + (swSheetWidth - 0.05) / sheetScale
-            y2 = -CDbl((Draw_Grating.DirSymbolPoints(i + 1)(1) - Data.guiPanelMidY) / 200) + (swSheetHeight / 2) * sheetScale
+            y2 = -CDbl((Draw_Grating.DirSymbolPoints(i + 1)(1) - Data.guiPanelMidY) / (2000 * sheetScale)) + (swSheetHeight / 2) / sheetScale
 
             skSegment = swSkMgr.CreateLine(x1, y1, 0, x2, y2, 0)
         Next
         swSkMgr.AddToDB = False
 
-        Dim note = iDrawing.CreateText2("Load Bearing Direction", (swSheetWidth - 0.075), (swSheetHeight / 2 + 0.012), 0, 0.003, 0)
+        Dim note = iDrawing.CreateText2("Load Bearing Direction", (swSheetWidth - 0.072), (swSheetHeight / 2 + 0.012), 0, 0.003, 0)
 
 
         status = swExtensions.SelectByID2(myView.GetName2, "DRAWINGVIEW", 0, 0, 0, False, 0, Nothing, 0)

Wardrobe/Wardrobe.vbproj

@@ -119,6 +119,7 @@
     <Compile Include="Recess Functions\Corner_Rectangle.vb" />
     <Compile Include="Recess Functions\Middle_Rectangle.vb" />
     <Compile Include="Recess Functions\Side_Rectangle.vb" />
+    <Compile Include="SolidWorks\Individual_3D_Simplified.vb" />
     <Compile Include="SolidWorks\Individual_Drawing.vb" />
     <Compile Include="SolidWorks\Frame_3D.vb" />
     <Compile Include="SolidWorks\Frame_Drawing.vb" />